FMVSS Compliance Review Program
Braun Corporation
| Manufacturer | Vehicle Modification Make/Model/Year(see note below) |
F/CMVSS 3011Fuel System Integrity | FMVSS 2082Occupant Frontal Crash Protection |
F/CMVSS 207 and 2103Seat and Seat Belt Anchorages |
|
| Braun Corporation | Side Entry Lowered FloorChrysler Town & Country Dodge CaravanRT – Standard 2009, 2010, 2011, 2012 |
PASS | PASS | Driver removable | PASS |
| Front row passenger removable |
PASS | ||||
| Second row driver side stowable bucket seat. |
PASS | ||||
| Third row 3 position split bench |
PASS | ||||
| Side Entry Lowered FloorChrysler Town & Country Dodge CaravanRT – Companion Van 2009, 2010, 2011, 2012 |
PASS | PASS | Driver fixed seat | PASS | |
| Front row passenger fixed seat |
PASS | ||||
| Third row 3 position split bench |
PASS | ||||
| Side Entry Lowered FloorChrysler Town & Country Dodge CaravanXT – Entervan 2009, 2010, 2011, 2012 |
PASS | PASS | Driver removable | PASS | |
| Front row passenger removable |
PASS | ||||
| Second row driver side folding bucket seat. |
PASS | ||||
| Third row 3 position split bench |
PASS | ||||
| Side Entry Lowered Floor Toyota Sienna Rampvan |
PASS | PASS | Driver removable | PASS | |
| Front row passenger removable |
PASS | ||||
| Third row 3 position split bench |
PASS | ||||
| Side Entry Lowered Floor Honda Odyssey Entervan |
PASS | PASS | Driver removable | PASS | |
| Front row passenger removable | PASS | ||||
| Third row 3 position split bench |
PASS | ||||
| Manufacturer | Vehicle Modification Make/Model/Year | F/CMVSS 3011Fuel System Integrity | FMVSS 2144Side Impact Protection and Side door Strength |
F/CMVSS 207 and 2103Seat and Seat Belt Anchorages |
|
| Braun Corporation | Rear Entry Lowered Floor Chrysler Town & Country 2009, 2010, 2011, 2012 |
PASS | PASS | Driver fixed | PASS |
| Front row passenger fixed | PASS | ||||
| Second row driver side fixed bucket seat. |
PASS | ||||
| Second row passenger side fixed bucket seat |
PASS | ||||
Note: Changes to the 2011 Chrysler Town & Country/Dodge
Caravan were inspected, information provided by the original vehicle
manufacturer was reviewed and engineering specialists consulted, indicating
that the 2011 Caravan compliance requirements considered in the NMEDA review
are pass-thru from the 2010 model so long as alterers have not changed any part
of their design and no vehicle alterations are performed in front of the
vehicle “A” pillar.
1 All requirements of the F/CMVSS 301 were reviewed
Help Center