FMVSS Compliance Review Program
Savaria Vehicle Group
| Manufacturer | Vehicle ModificationMake/Model/Year(see note below) | F/CMVSS 3011Fuel System Integrity | C/FMVSS 2082Occupant Frontal Crash Protection |
F/CMVSS 207 and 2103Seat and Seat Belt Anchorages |
|
| Savaria Vehicle Group | Side Entry Lowered FloorChrysler Town & Country Dodge Caravan Model: RT2009, 2010, 2011 and 2012 |
PASS | 2009, 2010 C/FMVSS: PASS2011 CMVSS: PASS | Driver removable | PASS |
| Driver fixed | PASS | ||||
| Front row passenger removable |
PASS | ||||
| Front row passenger fixed | PASS | ||||
| Second row driver side removable bucket seat |
PASS | ||||
| Third row 3 position split bench |
PASS | ||||
| Dual (Side and Rear) Entry Lowered FloorChrysler Town & Country Dodge CaravanModel: TX+2009, 2010, 2011 and 2012 |
PASS | 2009, 2010 C/FMVSS: PASS2011 CMVSS: PASS | Driver fixed | PASS | |
| Front row passenger removable |
PASS | ||||
| Third row driver side folding bucket | PASS | ||||
| Third row passenger side folding bucket |
PASS | ||||
| Side Entry Short Drop (Center) Lowered FloorChrysler Town & Country Dodge Caravan2009, 2010, 2011 and 2012 |
PASS | NOT APPLICABLE | Driver original seat base | PASS | |
| Front row passenger original seat base |
PASS | ||||
| Third row 3 position split bench seat |
PASS | ||||
| Front row passenger original seat base | PASS | ||||
| Second row driver side removable seat |
PASS | ||||
| Second row passenger side removable seat |
PASS | ||||
| Second row three position split bench seat |
PASS | ||||
| Third row stowable two position bench seat |
PASS | ||||
| Manufacturer | Vehicle Modification Make/Model/Year | F/CMVSS 3011Fuel System Integrity | FMVSS 2144Side Impact Protection and Side door Strength |
F/CMVSS 207 and 2103Seat and Seat Belt Anchorages |
|
| Savaria Vehicle Group | Rear Entry (Viewpoint Canada)Lowered Floor Chrysler Town & Country Dodge Caravan 2009, 2010, 2011, 2012 |
PASS | PASS | Driver fixed | PASS |
| Front row passenger fixed | PASS | ||||
| Second row driver side fixed bucket seat. | PASS | ||||
| Second row driver side bi-fold bucket seat. | PASS | ||||
| Second row passenger side fixed bucket seat |
PASS | ||||
| Second row passenger side bi-fold bucket seat |
PASS | ||||
| Third row driver side 2 position bi-fold | PASS | ||||
| Third row passenger side 2 position bi-fold |
PASS | ||||
| Rear EntryLowered Floor Long DropChrysler Town & Country Dodge Caravan 2009, 2010, 2011, 2012 |
PASS | PASS | Driver fixed | PASS | |
| Front row passenger fixed | PASS | ||||
| Second row driver side removable bucket seat | PASS | ||||
| Second row driver side stowable bucket seat | PASS | ||||
| Second row passenger side removable bucket seat | PASS | ||||
| Second row passenger side stowable bucket seat | PASS | ||||
| Second row three position bench | PASS | ||||
| Third row passenger side 2-position bi-fold | PASS | ||||
| Rear Entry Short Drop Lowered FloorToyota Sienna2011 and 2012 |
PASS | PASS | Driver original seat base | PASS | |
| Front row passenger original seat base | PASS | ||||
| Second row driver side removable seat | PASS | ||||
| Second row passenger side removable seat |
PASS | ||||
| Second row three position split bench seat | PASS | ||||
| Third row stowable two position bench seat | PASS | ||||
Note: Changes to the 2011 Chrysler Town & Country/Dodge
Caravan were inspected, information provided by the original vehicle
manufacturer was reviewed and engineering specialists consulted, indicating
that the 2011 Caravan compliance requirements considered in the NMEDA review
are pass-thru from the 2010 model so long as alterers have not changed any part
of their design and no vehicle alterations are performed in front of the
vehicle “A” pillar.
1 All requirements of the F/CMVSS 301 were reviewed
2 Up to September 1, 2010: The 30 mph frontal impact requirements of the FMVSS 208,
using two 50th percentile male test dummies, were reviewed (49CFR
571.208 S4.2.6, S4.2.7 and S5.1). As of September 1, 2010: The 35 mph frontal
impact requirements of the FMVSS 208, using two 50th percentile male
test dummies, were reviewed (49CFR 571.208 S4.2.6, S4.2.7 and S5.1 (b) (2).
3 All static requirements of the F/CMVSS 207 and 210 were reviewed.
4 FMVSS 214 is not applicable to vehicles with a GVWR greater than 6,000 pounds.
The dynamic requirements of S7 were reviewed for information purposes only.
Only the static requirements of S3 apply to Canadian vehicles.
Help Center