FMVSS Compliance Review Program
Sidewinder Conversions and Mobility
| Manufacturer | Vehicle Modification Make/Model/Year | F/CMVSS 3011Fuel System Integrity | FMVSS 2142Side Impact Protection and Side door Strength | F/CMVSS 207 and 2104Seat and Seat Belt Anchorages | |
| Sidewinder Conversions & Mobility | Rear Entry Lowered Floor Chrysler Volkswagon 2009, |
PASS | PASS3 | Driver fixed |
PASS |
| Front row passenger fixed |
PASS | ||||
| Second row driver side fixed bucket seat. |
PASS | ||||
| Second row passenger side fixed bucket seat |
PASS | ||||
| Second row three position bench |
PASS | ||||
| Third row driver side 2 position bi-fold |
PASS | ||||
| Third row passenger side 2 position bi-fold |
PASS | ||||
Note: Changes to the 2012 model years were inspected, information provided by the original vehicle manufacturer was reviewed and engineering specialists consulted, indicating that the 2012 model years compliance requirements considered in the NMEDA review are pass-thru from the 2011 model so long as alterers have not changed any part of their design and no vehile alterations were performed in front of the vehicle “A” pillar.
1 All requirements of the F/CMVSS 301 were reviewed
2 FMVSS 214 is not applicable to vehicles with a GVWR greater than 6,000 pounds. The dynamic
requirements of S7 were reviewed for information purposes only. Only the static requirements
of S3 apply to Canadian vehicles.
3 Sidewinder Conversions & Mobility compliance documents were reviewed for the CMVSS 214
and the dynamic requirements of FMVSS 214 S7 (reviewed for information purposes only).
4 All static requirements of the F/CMVSS 207 and 210 were reviewed.
Help Center